FR-32P

FR-32P

32-channel FRNet Isolated Digital Input Module.

The FR-2156T has 8-channels isolated photo-coupler output and the transfer speed is fixed at 1M bps. The default signal connector of FR-2156T is a 12-pin 0.15” screw terminal connector.

According to different applications, the users can choose suitable modules. The FR-2100 I/O module has a FRNet interface. The users can daisy chain several FR-2100 modules together. Via FRNet, the FR-2100 modules can extend the discrete I/O control of PC and PAC easily. For further information about the networking of FR-2100 series; please refer to literature related to I-7188EF, I-8172, FRB-200

Features

• Built-in Wire-saving FRnet DI/DO control
• High-speed transmission reliability
  
• Simple synchronization mechanism
  
• No software overhead on protocol processing
  
• Supporting broadcasting (1:n data transmission)
  
• Duplicating output easily
  
• Fixed I/O scan-time and I/O synchronization
  
• DIN-Rail mountable

Application

• Industrial Automation
  
• Remote I/O control
  
• Wire-saving application
  
• Built-in Wire-saving FRnet DI/DO control
  

Specification

• Communication speed: 250K bps
  
• Communication distance: 400m max
  
• Number of channels: 32
  
• Digital Logic Level
  
• Input low voltage: 0 ~ +/-1V
  
• Input high voltage: 3.5 VDC ~ 30 VDC
  
• Input impedance: 3K; 1/4W
  
• Response time: 1 KHz max
  
• Power Requirement: 10~30V
  
• Wire cable: CPEV 0.9S (2P Twisted-pair wire)
  
• Power consumption:
  
• 24V@140mA(max)
  
• Operating temperature: -25°C ~ +75°C
  
• Operating humidity: 10% ~ 90% RH, non-condensing
  
• Storage temperature: -30°C ~ +85°C
  
• Storage humidity: 5% ~ 95% RH, non-condensing
  
• Dimensions: 173 mm x 117 mm
  

Features

• Built-in FRnet interface
  
• Real I/O synchronization
  
• Innovative token-stream technology
  
• Support Broadcasting
  
• Real Deterministic Control
  
• Fixed Scan time: 256 points @ 2.88 ms
  
• Each bank consists of 8 input channels and has its own ground reference
  
• ASIC design without CPU
  
• Memory-map I/O
  
• No protocol and no software overhead
  
• Easy Programming and OS-independent
  
• Din-rail mounting
  
• Two-Wire Cabling
  
• Jumper setting
  
• Interface circuit