Logicbus/ Productos/ Ethernet/ Tarjetas para chassis/ E/S digitales/ DNA-DIO-406

MX
USA

Comprar ahora

Logicbus SA de CV

Buscar productos

Productos

DNA-DIO-406
DNA-DIO-406
24-Channel Industrial Digital Input/Output Board
 
DNA-DIO-406 compliments the rich family of PowerDNA TTL and industrial digital I/O products. The DNA-DIO-406 is packed with a number of unique features: as many as 24 DIO lines 350V RMS isolated as a group, pre-configured with 12 inputs and 12 outputs, powerful user-programmable hysteresis that improves noise immunity of the digital input signals.
 
Characteristics:
  • Use with “Cube” I/O chassis
  • 12 digital inputs, 12 digital outputs (configured as current sinks)
  • Supports wide range of digital logic levels
  • I/O throughput rate of 100kS/sec
  • User-programmable hysteresis
  • Outputs provide drive capability of 1000 mA/channel (max peak - 1500mA)
  • Requires external 3.3-36V (24V nominal) power source or can be powered internally using the DNA-PC-912 power conversion layer
 
Technical Specifications
Parameters
Digital Lines 12 inputs; 12 outputs (sink)
Logic Level 3.3-36V; rated for 3.3V, 5V, 12V, 24V, 36V
Input Current 360µA max
Input FIFO 512 samples
Input Protection ±40V over/under voltage, 3 kV ESD
Default Hysteresis Values Lower Limit: 0; Upper Limit: 300
Input High Voltage:
(with default hysteresis)		 @3.3V @5V @12V @24V @36V
1.6V 2.7V 7.5V 12V 17V
Input Low Voltage:
(with default hysteresis)		 @3.3V @5V @12V @24V @36V
1.5V 1.8V 2.0V 3.0V 12.5V
Output Drive Capacity continuous: 1000 mA per channel
maximum peak: 1500mA per channel
Output FIFO 1024 samples
Output High Voltage: Output Floating
Output Low Voltage 1.5 Volt max at 1 Amp
Output Protection 2 Amp, slow-blow fuse (one per channel)
Internal Sampling Rate 1 MHz
I/O Throughput Rate 100kHz max
Power Requirements
(VCC)		 3.3-36V (24V nominal) - external source
or DNA-PC-902 internally
Power Consumption 0.7W (no load) @ 3.3V VCC;
1.8W (no load) @ 36V VCC;
~ 0.22W/per output at 1000mA load
Physical Dimensions 3.875” x 3.875” (98 x 98 mm)
Operating Temp. Range Tested -40 to +85 °C
Operating Humidity 0 - 95%, non-condensing
Isolation 350Vrms