| Technical Specifications |
| General |
| Number channels/ports |
2 channels, each with two ports |
| Channel configuration |
Port A and Port B. Channels may receive data from either Port A or Port B on a channel, but not both simultaneously. Channels may
transmit on Port A, or Port B, or both. However, if transmission is set for both, then both ports transmit identical data. |
| Specification compliance |
ARINC 708/453 |
| Configuration |
Standard MIL-1553 based signal levels, fully compliant with ARINC-708 and 453 |
Interface (software selectable)
[measured at connector] |
Transformer:
18-27 VPP into
70 Ω load
|
Direct Coupling:
6-9 VPP into
35 Ω load |
| Isolation |
350 Vrms |
| Power Consumption |
5 W (not including load) |
| FIFO and Data TX/RX Specs |
| Configuration |
Fully buffered FIFO connections |
| FIFO size |
20 packets (each packet contains the standard 1600 bit/100 word frame.) |
| Environmental |
| Operating Temp. (tested) |
-40°C to +85°C |
| Operating Humidity |
0 - 95%, non-condensing |
| MTBF |
275,000 hours
|
| Vibration |
IEC 60068-2-6 |
5 g, 10-500 Hz, sinusoidal |
| IEC 60068-2-64 |
5 g (rms), 10-500 Hz, broad-band random |
| Shock IEC 60068-2-27 |
50 g, 3 ms half sine, 18 shocks @ 6 orientations
30 g, 11 ms half sine, 18 shocks @ 6 orientations |
| Altitude |
0 - 70,000 feet (0 - 21,336 m) |
