Technical Specifications |
Parameters |
Digital Lines |
12 inputs, 12 outputs (opto-darlington) |
Logic Level |
5V - VCC |
Drive Capacity |
80 mA per channel continuous;
200mA per channel maximum peak |
FIFO Size |
Input: 512 samples; Output: 512 samples |
Default Hysteresis Values |
Lower DAC limit: 200
Upper DAC limit: 300 |
Input High Voltage:
(with default hysteresis) |
@7V |
@12V |
@24V |
@36V |
4.5V |
4.75V |
10.5V |
13V |
Input Low Voltage:
(with default hysteresis) |
@7V |
@12V |
@24V |
@36V |
4.25V |
4V |
6.75V |
8.75V |
Output High Voltage: |
@7V |
@12V |
@24V |
@36V |
6V |
11.2V |
22.8V |
34.1V |
Output Low Voltage: |
10kΩ pull-down resistor to ground |
Input Protection |
±40V over/under voltage, 7kV ESD |
Output Protection |
100mA resettable PTC fuse |
Internal Sampling Rate |
2 kHz |
I/O Throughput Rate |
1 kHz max |
Power Requirements (VCC) |
7-36V (24V nominal) - external source
or DNA-PC-902 internally |
No-load Power Consumption
(all outputs drving Logic 0) |
@7V |
@12V |
@24V |
@36V |
0.5W |
0.6W |
0.8W |
1.6W |
No-load Power Consumption
(all outputs drving Logic 1) |
@7V |
@12V |
@24V |
@36V |
0.7W |
1.0W |
2.5W |
3.5W |
Physical Dimensions |
3.875” x 3.875” (98 x 98 mm) |
Operating Temp. Range |
Tested -40 to +85 °C |
Operating Humidity |
0 - 95%, non-condensing |
Isolation |
350Vrms |