GL100-N-4TSR-GS103JT
El Graphtec GL100-N-4TSR-GS103JT es un conjunto que viene con el registrador de datos compacto GL100-N, así como el adaptador de termistor de entrada de 4 canales GS-4TSR y el sensor de termistor GS-103JT. Su cuerpo permite a los usuarios cambiar sensores y terminales para medir varias señales. La dimensión del cuerpo principal es un ligero de 2,6 pulgadas de ancho x 3,93 pulgadas de alto x 1,06 pulgadas de espesor (66 mm x 100 mm x 27 mm).
Funciona con dos baterías AA (no incluidas) o alimentación de bus USB (incluye cable USB MicroB-A incluido). Con una memoria integrada de 4,9 MB y una memoria externa a través de la ranura para tarjeta Micro SD, el cuerpo del GL100 también incluye un puerto USB (conexión Micro B).
La pantalla del GL100N4TSRGS103JT es un monocromo retroiluminado con resolución de 128 × 64 puntos que muestra los valores medidos y la configuración. Los datos grabados no se muestran en la unidad principal; Los datos capturados solo se pueden mostrar en la PC usando el software de aplicación incluido.
El GS-4TSR incluido es un adaptador de termistor de entrada de 4 canales que puede medir la temperatura en lógica (patrón de señal) o pulso (conteo instantáneo o acumulado), y puede medir un rango de temperatura de -40 a 120 ° C dependiendo del sensor del termistor conectado al adaptador. El sensor de termistor GS-103JT se incluye con el conjunto GL100-N-4TSR-GS103JT y tiene un rango de temperatura de -40 a 120 ° C.
- Este conjunto viene con el registrador de datos GL100-N, el adaptador de termistor de entrada de 4 canales GS-4TSR y el sensor de termistor GS-103JT
- Termistor (Máx. 120 ° C) de 4 canales, lógica o pulso de 4 canales.
- Sensor de temperatura (-40 a 120 ° C), tipo ultra delgado; utilizar con el módulo GS-4TSR
- Captura de datos en tiempo real
- Visualice el valor de los datos capturados en la pantalla LCD en tiempo real y guarde los valores de monitoreo
- Soporta una variedad de medidas intercambiando el módulo de entrada
- Software para PC y dispositivo móvil inteligente disponible
- Software específico de la industria: agricultura, logística, energía.
- Memoria incorporada: 4.9 MB
- puerto de tarjeta de memoria microSD
| GL100-N Main Unit Specifications | ||
| Number of channels: | Varies by the input module used, and measurement type is fixed with each input module | |
| Output signal: | Alarm (1 channel), solid state switch with optical isolation (Optocoupler, Max. load is the 30 V, 50 mA) | |
| Interface to PC: | USB (micro USB B type connector) | |
| Storage device: | Built-in memory: RAM (Approx. 4.9 MB) External memory: microSD memory card * Maximum file size for captured data is 1.9MB. It is recommended to use the microSD memory card that supports sleep mode. (Example: TS4GUSDHC4, made by Transcend) |
|
| Display | LCD (backlit monochrome, graphical type 128 x 64 dots) Contents: Captured data and Setting menu (Stored data is not able to replay. It is able to replay using the PC application software.) |
|
| Functions: | Real-time data capturing Display the captured data value to the LCD in real-time and save the monitoring values Set conditions using the Menu setting |
|
| While using USB port: Output captured data in real-time Output the saved data from the internal memory Full control of the GL100 from the PC application software |
||
| Alarm: | Action Outputs the signal when the measuring data reaches the present conditions of alarm Source Level of measuring data Detecting method Condition: Higher or lower (signal is higher or lower than the threshold) Combination: or |
|
| Trigger: | Action Start or stop the recording of captured data by trigger Source Start trigger: OFF, Level (*), Alarm, or Date Stop trigger: OFF, Level (*), Alarm * Level trigger is available in the analog input of the GS-4VT, GS-4TSR, and GS-3AT module. Detecting method of the Level (*) Condition: Rising or Falling (signal is passed through the threshold) Combination: OR or AND |
|
| Dustproof and waterproof: | IP54 compatible (*) * It is effective only in the condition that the input module is set to the GL100 and then the covers of connector and battery are closed. It is recommended to replace the packing of cover in periodically. |
|
| Power source: | Alkaline battery (AA size x 2) USB bus-power (5V, 200 mA) (*) * When AC adapter for USB device is used, the required power capacity is 5V, 1A. Battery and AC adapter is not included. |
|
| Operating environment: | Temperature: -10 °C to 50 °C Humidity: up to 80 % RH (non condensed) |
|
| External dimension [W x D x H]: | Approx. 66 x 100 x 27 mm (exclude protrusion | |
| Weight: | GL100-N: Approx. 125 g | |
| GS-4TSR 4-Channel Thermistor Specifications | ||
| Type of measurement: | Temperature, Logic (signal pattern) or Pulse (instant or accumulated count) | |
| Number of channel: | Temperature: 4 channels (measurement type for channels can each be separately selected); Logic/pulse: 4 channels (measurement type for channels can be selected as set of 4 channels) | |
| Input method of temperature: | Scans by the photo-MOS-relay, all channels non-isolated input | |
| Temperature sensor: | Thermistor (optional) | |
| Measuring range: | Temperature: -40 to 120 °C (varies by the type of sensor); (Sensor GS-103AT-4P: -40 to 105 °C, GS-103JT-4P: -40 to 120 °C) | |
| Measuring accuracy: | GL100 main body; -40 = TS < 0 °C: ± 0.7 °C; 0 = TS = 35 °C: ± 0.2 °C; 35 < TS = 70 °C: ± 0.4 °C; 70 < TS = 120 °C: ± 1.0 °C; Thermistor sensor (GS-103AT-4P or GS-103JT-4P); Typical ± 0.4 °C | |
| Unit of temperature measurement: | Switchable °C and °F | |
| Input of Logic/Pulse: | Input signal: Voltage or Dry contact signal; Voltage input: 0 to +24V (common ground); Dry contact signal: Relay or Solid state relay; Threshold voltage: Approx. +2.5 V, Hysteresis: Approx. 0.5 V (Status of the signal is changed in the 2 V and the 2.5 V.) | |
| Measuring range of Pulse: | Instant count: up to 200 counts/sampling interval; Accumulated count: up to 65535 counts (Accumulated value is reset by starting the data recording or pressing the QUIT key.) | |
| Length of cable: | Approx. 200 mm | |
| Operating environment: | Temperature: -10 °C to 50 °C; Humidity: up to 80 % RH (non condensed) | |
| External dimension [W x D x H]: | Approx. 46 x 66 x 36 mm (exclude protrusion) | |
| Weight: | Approx. 83 g | |
| GS-103JT-4P Thermistor Sensor Specifications | ||
| Connectable input module: | All types of input module, Cable is connected between the input module and the GL100. | |
| Length of cable: | Approx. 1.5 m | |
| Operating environment: | Temperature: -10 °C to 50 °C, Humidity: up to 80 % RH (non condensed) | |
| Measuring range: | Temperature: -40 to 120 °C | |