Productos ->Adquisición y registro de datos - DAQ ->Graficadores -> GL7000
Características
MERCADOS APLICABLES
GL7000
Unidad principal de la plataforma de datos, salida de alarma de 10 canales, memoria flash de a bordo de 2 GB, ranura para tarjeta SD, interfaz de PC Ethernet / USB
GL7000 Data Platform es una plataforma de adquisición basada en módulos con un mecanismo independiente que proporciona pruebas complejas de voltaje, temperatura, voltaje de alta velocidad, alto voltaje, acelerómetros y medidores de tensión. El sistema independiente hace que los datos se pongan en marcha de forma rápida y precisa. Las mediciones para diferentes aplicaciones se pueden agregar con módulos específicos de señal. La capacidad de muestreo máxima de 1MS / s también proporciona una capacidad de grabación de señal dinámica para aplicaciones que involucran señales de cambio rápido. Al proporcionar un verdadero sistema de prueba independiente con pantalla táctil o software basado en PC, se abre un ciclo de inicio rápido para un sistema de prueba escalado.
Características
- Filtro de paso bajo analógico (Anti-Aliasing) para la cancelación de ruido.
- Módulos de entrada versátiles para varios niveles de señal.
- Sistema autónomo con capacidad para mejorar el requisito de la señal de prueba futura.
- Capacidad de memoria mejorada para grabación extendida en cuatro medios de memoria diferentes.
- Usos de software compatibles con nuestros otros instrumentos portátiles GL Datalogger.
- Paquete de software incluido con la compra de la plataforma.
MERCADOS APLICABLES
- Fabricación de componentes aeroespaciales y automotrices.
- Fabricación e I + D
- Construcción y mantenimiento de edificios
- Medición de maquinaria y procesos industriales.
- Industria de equipos electricos
- Industria de equipos de transporte (rieles)
- Energía (Electricidad, Gas) y Empresas de Servicios Públicos.
- Desarrollo de equipos de alta precisión / semiconductores
- Comunidades académicas y de investigación.
| Item | Description | ||
| Model number | GL7000 | ||
| Number of module |
Attached to up to 10 modules | ||
| Number of input channels | Max. 112 channels in 1 of GL7000 | ||
| External Input/Output signals | Input | Start/Stop, External trigger, External sampling, Auto balance Signal type: Contact (relay), Open collector, Voltage |
|
| Output | Trigger, Busy, Alarm (10 channels) Signal type: Open collector (pulled-up by resistor 10 kΩ) |
||
| Trigger, Alarm function | Trigger action | Start or stop capturing data by the trigger | |
| Trigger repeat | Enabled (ON): Automatically re-armed for the next data capture function Disabled (OFF): Data capture is completed in a single trigger |
||
| Trigger source | Start: Off, Measured signal, Alarm, External signal, Clock, Week or Time Stop: Off, Measured signal, Alarm, External signal, Clock, Week or Time |
||
| Trigger determination conditions for measured signal | Combination: OR or AND condition at the level of signal or edge of signal Analog: Higher/Rising, Lower/Falling, Window-in, Window-out Logic: Higher/Rising, Lower/Falling Pulse: Higher/Rising, Lower/Falling, Window-in, Window-out |
||
| Alarm determination condition | Combination: OR or AND condition at the level of signal or edge of signal Analog: Higher/Rising, Lower/Falling, Window-in, Window-out Logic: Higher/Rising, Lower/Falling Pulse: Higher/Rising, Lower/Falling, Window-in, Window-out |
||
| Alarm output | 10 channels | ||
| Pre-trigger | Number of data before trigger: Up to specified number of captured data | ||
| Calculation function | Between channels | Addition, Subtraction, Multiplication and Division for two analog inputs (Sampling speed is limited up to 10 Samples/s (100 ms interval). Available arithmetic element and the output destination is the analog input channel 1 to 100.) | |
| Statistical | Select two calculations from Average, Peak, Max., Min. in real time and replay | ||
| Move function of the display range | Beginning, center or end of the data, Trigger point, Specific time (absolute, relative), Call cursor | ||
| Search function | Search for analog signal levels, logic signal pattern, pulse signal levels or alarm point in captured data | ||
| Annotation function | Comment can be set in each channel (up to 31 alphanumeric characters) | ||
| Message / Marker Functions | Message: The registered messages or entered message is able to be recorded for any timing. Up to 8 messages can be pre-registered. Marker: Marker is able to record for occurring alarm or power failure. |
||
| Resume | Resume automatically in the same condition after power is recovered as when the power failure occurred during data capture | ||
| FFT analysis function (Firmware ver. 1.20 or later) | Analyzing frequency range | 0.08, 0.2, 0.4, 0.8, 1.6, 2, 3.2, 4, 8, 20, 40, 80, 200, 400, 800 Hz, 2, 4, 8, 20, 40, 80, 200, 400 kHz | |
| Number of points | 500, 1000, 2000, 4000, 10000 | ||
| Window function | Rectangular, Hanning, Hamming, Blackman, Flat-top, Exponential | ||
| Averaging | Summation average, Exponential average, Peak hold | ||
| Channels | 4 channels | ||
| Functions | Y-T, Linear, Power, PSD, Cross, Transfer function, Coherence, COP | ||
| Display mode | Single display, Dual display, Nyquist | ||
| Interface to PC | Ethernet (10 BASE-T/100 BASE-TX), USB 2.0 (High speed) | ||
| Network function | WEB server, FTP server, FTP client, NTP client, DHCP client | ||
| USB drive mode | Emulate the USB memory device | ||
| Storage device | Built-in | RAM (2 million samples, built-in amplifier module), Flash memory (2 GB, built-in the main module) | |
| External | SD card (Support SDHC, up to 32GB) slot, SSD (Approx. 128GB) The file for capturing data is limited up to 2GB. | ||
| Data saving function | Captured data | Built-in RAM, Built-in Flash, SD memory card, SSD (Data is saved directly to it.) | |
| Data in built-in RAM | Specified number of data up 2 million samples in increments of 1 | ||
| Auto save | Available for the built-in RAM Enabled (ON): Data in the RAM is saved automatically to the built-in Flash, SD memory card, SSD Disabled (OFF): Data in the RAM is not maintained after power is turned off |
||
| Capturing mode | Mode: Off, Normal, Ring, Relay Ring: Saved most recent data (Number of capturing data: 1000 to 2000000 points, Destination of data: Built-in RAM, Built-in Flash, SD memory card, SSD) Relay: Saved data to multiple file without losing data until capturing data is stopped (Destination of data: Built-in Flash, SD memory card, SSD) |
||
| During data capture | Displaying information in two windows, Hot-swapping the SD memory card, Saving data in between cursors. | ||
| Backup | Backup interval: Off, 1, 2, 6, 12, 24 hrs. Data destination: SD memory card, SSD, FTP server Data destination for backup cannot be specified to the same storage for destination of capturing data. |
||
| Engineering Scale function | Measured value can be converted to the engineering unit
Analog voltage: Converts by four reference points (gain, offset) Temperature: Converts by two reference points (offset) Pulse count: Converts by two reference points (gain) |
||
| Synchronization between units | Start and Trigger | ||
| Accuracy of clock (at 23°C) | ±0.002% (Monthly deviation approx. 50 sec.) | ||
| Operating environment | 0 to 45°C, 5 to 85% RH (non condensed) | ||
| Power source | 100 to 240 V AC, 50 to 60Hz | ||
| Power consumption | 140VA | ||
| Standard accessories | Quick guide, CD-ROM, AC power cable | ||
| External dimensions (W x D x H) | Main module: Approx. 193 x 141 x 160 mm (Excluding Projection), Alarm output terminal: Approx. 30 x 136 x 145 mm (Excluding projection) | ||
| Weight | Main module: Approx. 2.2 kg, Alarm output terminal: Approx. 350 g | ||
| Warranty | 3-Yr Standard Warranty | ||