Technical Specifications |
Standard Interfaces |
To Host Computer |
Two independent 1000Base-T Gigabit Ethernet ports (100/10Base-T compatible) |
Distance from host |
100 meters, max |
Config/General |
RS-232, 9-pin “D” |
Sync |
Custom cable to sync multiple cubes |
I/O Slots Available |
DNR-6-1G |
6 slots |
Host Communications |
Ethernet data transfer rate |
20 megabyte per second |
Analog data transfer rate |
up to 6 megasample per sec (16-bit samples) |
DMAP I/O mode |
update 1000 I/O channels (analog and/or digital) in less than 1 millisecond, guaranteed |
Processor |
CPU |
Freescale 8347 series, 400 MHz, 32-bit |
Memory |
128 MB (not including on-board Flash) |
Status LEDs |
Power supplies within spec, One second system heart-beat, Attention, Read/Write, Power, Communications Active |
Environmental |
Temp (operating) |
Tested to -40 °C to 70 °C |
Temp (storage) |
-40 °C to 85 °C |
Humidity |
0 to 95%, non-condensing |
Vibration |
(IEC 60068-2-64) |
10–500 Hz, 3 g (rms), Broad-band random |
(IEC 60068-2-6) |
10–500 Hz, 3 g, Sinusoidal |
Shock |
(IEC 60068-2-27) |
50 g, 3 ms half sine, 18 shocks at 6 orientations;
30 g, 11 ms half sine, 18 shocks at 6 orientations |
MTBF |
130,000 hours |
Physical Dimensions |
DNR-6 series |
5.25” x 6.2” x 10.5” (3U in a 19” rack) |
Power Requirements |
Voltage |
9 - 36 VDC (AC adaptor included) |
Fuse |
Intenal 10 A |
Power Dissipation |
13 W at 24 VDC (not including I/O boards) |
Power Monitoring |
I/O board power |
All internal power supplies monitored to ±1% accuracy. All PS voltages may be read by host. LED annunciators indicate out of range |
Input current |
Monitored by host, LED indicates overcurrent |
Input voltage |
Monitored by host, LED indicates out of range |