FR-2057TA

16-channel FRNet Isolated Source Output Distributed I/O Module with Digital Output.

Introduction

The FR-2053TA has 16-channel isolated Sink/Source input, while the FR-2057TA has 16-channel isolated source output. The FR-2000 I/O module has an FRnet interface. The users can daisy chain several FR-2000 modules together. Via FRnet, the FR-2000 modules can extend the remote I/O control of PC, PAC and PLC easily. Further information about the networking of FR-2053TA/2057TA; refer to literature related to I-7188EF, I-8172, FRB-100/200/200U.

Features

Built-in Wire-saving FRnet DI/DO control
High-speed transmission reliability
Simple synchronization mechanism
No software overhead on protocol processing
Supporting broadcasting (1:n data transmission)
Duplicating output easily
Fixed I/O scan-time and I/O synchronization
DIN-Rail mountable

Specifications & Additional Information

Specifications
Digital Output
Output Channel	16
Output Type	Source, Open-Collector (PNP)
Load Voltage	30VDC, Max
Load Current	100mA, Max
Isolation Voltage	3750Vrms
Interface
2-wire cabling	CPEV 0.9 (2P twisted-pair cable), When different cables are used, the transmission distance may change
Transfer distance	Max. 400m Max. 100m for "H" version
LED Indicators	Power, Communication Run, Communication Error, Terminal resistor,Digital output
Transfer speed	250Kbps 1Mbps for "H" version
Cyclic scan time	2.88ms 0.72ms for "H" version
Connection	Removable 20-pin Terminal Block
Power
Input Voltage Range	+10 ~ +30VDC (Non-isolation)
Power consumption	2.4W Max
Protection	Power reverse polarity protection
Frame Ground for EMS Protection	Yes
Connection	5-Pin Removable Terminal Block
Mechanical
Case	Plastic
Flammability	UL 94V-0 materials
Dimensions	32.5mm x 110mm x 102 mm (W x H x D)
Installation	DIN-Rail
Mechanical
Operating Temperature	-25 °C~ +75°C
Storage Temperature	-30 ~ +85°C
Ambient Relative Humidity	10% to 90% non-condensing

Categorías

Ver todos los productos »

Ver todas las marcas »

FR-2057TA